#
Question
Answer
What to do…
#1

Can you fit wood blades?

A. Yes if the blade specifications are 185mm Diameter, 20mm Bore, Max 2.4mm Kerf, No. of Teeth is optional.

#2

Can you fit a dust bag?

A. A dust bag cannot be fitted to this machine.

#3

Can a dust extraction be fitted?

A. A dust extraction cannot be fitted to this machine.

#4

Where can I find the cutting capacities?

A. See specification page in the operator's manual.

B. Go to product webpage.

#5

Can it cut stainless steel or cast iron?

A. No. Use only on mild steels.

#6

Can a diamond blade be fitted to this machine?

A. Dry cut diamond blades only.

#7

The depth stop screw is not locking.

A. Check if there is a washer between the scale plate and the plastic locking lever.

B. Then check if the threaded insert is in place.

A. If in warranty please contact our customer service team for required replacement parts.

#8

Blade not cutting in line with 0 marker on the base.

A. Replace base or return if under warranty

A. Replace base or return if under warranty.

#9

Blade not cutting straight.

A. Check if Blade is parallel with the base

B. Check Guide Bar is parallel with the blade

C. Check Blade is not damaged

A. Base may need replacing

B. Setup required

C. Replace if damaged

Didn't find the information you were looking for?
Contact our customer service team for one to one help and advice.

Follow us:

Copyright © 2018 Evolution Power Tools Ltd.