One saw, one blade. Cuts all.
Utilising patented professional RAGE® technology; easily cuts Steel, Aluminium, Wood (even wood with nails) and Plastic, using just one blade!
VIRTUALLY NO SPARKS
When cutting Steel, it leaves an instantly workable finish, producing no heat, no burr and virtually no sparks - unlike alternative methods (above).
0° - 45° BEVEL TILT
Easy-to-access 0-45° bevel tilt and adjustable depth of cut enhances the saw’s versatility. Plus, clear line of sight ensures accurate cuts every time.
CUTS PAVING & STONE TOO!
The optional diamond blade is available for cutting Stone, Concrete & Brick. The FURY really is the complete cutting package!
|Type of Cut
|Cross Cut (0° x 0°)
|Bevel Cut (0° x 45°)
|Mild Steel Plate - Max Thickness
|Mild Steel Box Section - Max Wall Thickness
|Motor (230-240V ~ 50 Hz)
|Speed No Load
||3700min-1 / rpm
|Dust Port Diameter
|Max. Bevel (Left)
||0° - 45°
Click on the question to see the answer.
Can you fit wood blades?
Yes, the Evolution 185mm wood blade can be fitted.
Can you fit a dust bag?
A dust bag cannot be fitted to this machine.
Can a dust extraction be fitted?
A dust extraction cannot be fitted to this machine.
Can it cut stainless steel or cast iron?
No. Use only on mild steels.
Can a diamond blade be fitted to this machine?
Yes, the Evolution 185mm diamond blade can be fitted.
The depth stop screw is not locking.
A. Check if there is a washer between the scale plate and the plastic locking lever.
B. Then check if the threaded insert is in place.
Please contact our customer service team
if replacement parts are required.
Blade not cutting in line with 0 marker on the base.
Replace base or return if under warranty
Blade not cutting straight.
A. Check if Blade is parallel with the base
B. Check Guide Bar is parallel with the blade
C. Check Blade is not damaged
Not found the answer you were looking for?